Bogen Communications, Inc. will be introducing several new products at InfoComm 2016 in Las Vegas, NV, including a full line of sound contractor-grade Class-D based paging and intercom amplifiers, a pair of new Apogee high-performance pro-audio amplifiers—one of which includes an integrated DSP module—and a state-of-the-art, self-contained, 6-zone music and paging system.
Highly Efficient Class-D Amplifiers
Bogen introduces six models in its revamped Gold Seal Series of amplifiers—now featuring Class-D amplification, ranging from 35 watts of output up to 500 watts, making them ideal for sound contractors who want to design in the precise power level needed.
The Class-D amplification system enables highly efficient operation, with reduced power consumption and heat dissipation compared with previous models. Features include 7 inputs (4 MIC, 1 MIC/TEL, 1 MIC/AUX, and AUX), dual function 10-band graphic equalizer, loudness contour control, phantom power for each MIC input, variable music muting, remote master volume control, automatic level control, low-cut filter for MIC channels and AUX fade back after TEL page.
The Gold Seal Series works with 4-ohm, 8-ohm, 25V, 25VCT, and 70V systems. The amps provide several safety features, as well as thermal and overload protection. Available accessories, sold separately, include a tamper-resistant front cover, rack mounting kit and a remote volume control.
Apogee Professional Amplifiers
Bogen is proud to introduce two new models in its Apogee-branded line of professional audio amplifiers. Apogee’s CA8000D and CA8000DX amplifiers offer cost-effective performance for permanent installations and commercial sound.
Suitable for high-end installations, the CA8000DX offers a state-of-the-art built-in Digital Signal Processor (DSP) module (model DLX24i) for extensive and comprehensive signal processing, including factory loudspeaker presets, turning the amplifier into a complete audio solution.
Also See: Evolution vs. Innovation: Audio Trends to Look for at InfoComm 2016
The DSP module is PC remote controlled using intuitive System Control Manager software – the same software used on the standalone, rack-mountable Apogee DLX24 digital loudspeaker controller.
These CA-series amplifiers use the latest in amplifier technology. They provide unparalleled sonic quality, exceptional reliability and reduced heat output, all at a great value. Both the CA8000D and CA8000DX are 2-ohm stable and can drive 70V lines directly.
Both models are only two rack units in height, and feature front panel level controls with tamper-resistant covers to avoid any unwanted altering or inadvertent adjustment. Fully featured, the CA-series amplifiers offer balanced inputs and 4-pole speaker twist connector outputs.
Six-Zone Music and Paging System
The Bogen DRZ120 is a unique, self-contained 6-zone music and paging system for small- to medium-sized applications. It combines a digital AM/FM tuner with MIC, LINE, and AUX inputs. It has a 120-watt amplifier capable of driving 4-16-ohm speaker systems, as well as 70-volt distributed systems.
The DRZ120 permits connection of up to six individually volume-controlled paging zones. The DRZ120 also features Bass and Treble controls with a 5-segment LED output meter.
The built-in tuner uses a PLL synthesizer to provide accurate frequency selection and the MIC1 input can be set for VOX-activated muting of the other audio inputs. The unit’s microphone input accepts a balanced Lo-Z microphone with selectable Phantom Power.
Various input connections are available: XLR, TRS, RCA, USB drive, secure digital card, and EuroBlock screw terminals.
Bogen’s 2016 InfoComm booth (N2612) will also feature the following products on display:
Compact Line Array Loudspeaker System
Bogen’s ALA-1 is an easy-to-use system that takes the difficulty out of designing and installing with line arrays. The system consists of four parts:
- 1. The ALA-1 is the main array, which incorporates four metal-alloy woofer cone drivers featuring the pioneering voice-coil guidance system by NEAR, a unique Ferrofluid in the magnet gap.
- 2. The ALA-1LT Long-Throw module increases the array length by 50%, focusing this extra energy to augment and extend the performance of the ALA-1 for longer distances.
- 3. The ALA-1DF Down-fill Module increases vertical coverage below the main array, greatly improving articulation in front-row near-field listening areas, often eliminating the need for stage-based front fill speakers.
- 4. The ALA-1S has a 12″ woofer which provides high output and extended bass for music and video productions. In addition, a unique mounting bracket is included that allows the full ALA array to be suspended and tilted.
